12V 20A Rocker Switch
$3.00
This is a 12V 20A Automotive LED Rocker Switch.
Great for use as a Master On/Off Switch.
Will require a 3/4 Inch hole for mounting.
This is a High Side Switch and will need to be wired in series on your positive line.
Switch Pins are as follows:
Pin 1 (+) – 12V in
Pin 2 (A) – Current Out
Pin 3 (Ground) – Ground Pin for LED Power (golden colored Pin)
If you do not intend to make use of the LED, simply do not wire the golden ground pin back to battery negative.
LED will be dimmer on 2S battery.
WARNING: Blaster modification products are not toys and as such are not suitable for use by children without direct adult supervision. Modifying any blaster is done at your own risk. Neither Containment Crew, the manufacturer of the modification product, nor the blaster’s manufacturers are liable for any damage or injuries resulting from the use of a modified blaster or the modification process itself. Always take appropriate precautions to avoid injury when modifying or using modified blasters.
NOTICE: Use of modification kits or other aftermarket modification parts may dramatically increase the wear and tear on your blaster and may cause parts to break or otherwise fail significantly faster than under normal use. By purchasing this product you agree that you understand and accept this risk.
Containment Crew is not affiliated with any blaster manufacturer.
