MTB Wolverine MK2 (180 size 6 Volt)

Wolverine MK2 180 Motors by Make Test Battle
(definitely not Hellcats this time!)

Wolverines are an ideal pusher motor when a high rate of fire is desired in a full auto blaster. Larger than 130 size motors, these may require some shell modifications for them to fit. Featuring more torque than Honey Badgers, these motors will provide improved trigger response. These motors also have a higher RPM than Hellcats providing increased flywheel speeds for multi-stage builds, afterburners, or high contact flywheel systems.

– 6 volt operation Ideal for a 2s LiPo battery.
– 36,100 RPM.
– 590g.cm of Torque
– 37.9 Amp stall current with a 2s LiPo means a suitable high amperage battery is required.

These 6 Volt motors should be suitable for running from a 2S LiPo pack or 6V to 7.2V NiMH Packs.

180 sized upgrade motors for most flywheel blasters. These may require shell modifications depending on application.

MTB doesn’t recommend using these motors with a 3s LiPo.They should work okay with a 3s for pusher motors in a Rapidstrike, but be aware that this is almost double the recommended operating voltage.

Please note that these are not drop in replacements electrically for the standard 130s in most blasters. They are intended to operate at around 6V and are capable of high current draws, as such they are intended to be used with high current Lipo / Li-ion / NiMH packs with appropriate gauge wiring (16 gauge or larger should be suitable). These motors are sold individually.